EasyFlow Pro
ART 710 - Bronze Valve Assembly complete with additional IV and drain and insulation jacket.
Fitted with:
- Ball type isolating valve with extended quarter turn T-handle
- Pressure gauges for measurement of inlet and outlet pressure
- Built in pressure reducing valve (1.5 to 6 Bar) with integral strainer
- Capped water meter connection for direct fittings of concentric Class D water meter
- Built in double check valve (Water regulations and BS EN 13959)
- Built in drain point on outlet isolation valve to comply with water authority metering policy
- EPP custom moulded insulation jacket (BS EN 13501-1). This can be fully removed with or without the water meter installed.
Horizontal or vertical mounting but flow direction indication on the valve body and the EPP insulation jacket must be adhered to.
The EasyFlow Pro combination valve can be used in domestic potable water applications (both hot and cold), WRAS approved and UK Reg4 compliant.
Connection
Screwed BSP Parallel (ISO 228/1)
Pressure
Max Pressure: 16 Bar
Outlet Pressure Range: 1.5 - 6 Bar
Pre-set Pressure: 3 Bar
Temperature
+4°C to +80°C
Approvals
WRAS Approved
Sizes:
| Code | Description | Min Temp °C | Max Temp °C | Pressure Bar Rated | Stock Availability |
|---|---|---|---|---|---|
| AEFP710075100 | 1" (3/4") EasyFlow Pro - Art 710 WRAS Bronze BSPP Valve Assembly c/w Insulation Jacket | 4 | 80 | 16 | Stocked in the UK |
| AEFPJACKET710EFP | Art 710 EasyFlow Pro Thermal Jacket | Stocked in the UK | |||
| AEFPIVDRAIN | Art 710 EasyFlow Pro Isolation Valve & Drain Cock | Stocked in the UK | |||
| AEFPADAPTORBUSH | EasyFlow & EasyFlow Pro 1" x 3/4" Reducing Adaptor | Stocked in the UK | |||
| AEFPGAUGE010 | EasyFlow & EasyFlow Pro Pressure Gauge 0-10 Bar | Stocked in the UK | |||
| AEFPGAUGE020 | EasyFlow & EasyFlow Pro Pressure Gauge 0-20 Bar | Stocked in the UK | |||
| AEFPWMHCAP | EasyFlow & EasyFlow Pro Water Meter Housing Cap & O'Ring | Stocked in the UK | |||
| AEFPGASKETS | EasyFlow & EasyFlow Pro Union Gasket | Stocked in the UK |